# Ohme ePod EV charger review

Source: https://www.bestchargers.co.uk/ohme-epod/
Updated: November 2026
A feature comparison from the maker's own documents and the energy suppliers' lists. No scores, ratings or rankings.

The Ohme ePod is a home EV charger rated at 7.4 kW single-phase, with a Type 2 socket for your own cable. It can charge from surplus solar, and Octopus lists it for Intelligent Octopus Go. Not included: charging cable (sold separately in 5 m or 8 m); screen; Ethernet. Ohme does not say whether it has an RFID card reader.

## Ohme ePod at a glance: what is included

- 7.4 kW single-phase with a Type 2 socket; Ohme sells 5 m and 8 m cables separately
- No screen: three buttons on the unit, a five-colour status light and the Ohme app
- The data sheet model connects over a 3G/4G multi-network SIM (data cost covered for the first 3 years); a UK-only Wi-Fi and Bluetooth version is also listed
- Solar charging and dynamic load balancing work when a CT clamp is fitted
- Built-in PEN fault detection and Type A 30 mA RCD with 6 mA DC detection
- Octopus lists the ePod as supported for Intelligent Octopus Go

**Included:** Type 2 socket, usable with Type 1 or Type 2 cars with the right cable; Built-in mobile data SIM; CT clamp in the box, for solar charging and load balancing; Built-in PEN fault detection; Over-the-air updates.

**Not included:** Charging cable (sold separately in 5 m or 8 m); Screen; Ethernet; Three-phase or 22 kW version.

**Not stated by Ohme:** RFID card reader.

## Ohme ePod features compared with 26 chargers

Other chargers are listed A to Z; this is not a ranking.

| Feature | Ohme ePod | Chargers with it | Other chargers with it |
|---|---|---|---|
| Listed for Intelligent Octopus Go | Yes | 15 of 26 | Andersen A3, Andersen Quartz, Cord Zero, Hive EV Charger (Sync Energy Wall Charger 2), Hypervolt Home 3 Pro, Indra Smart LUX, Indra Smart PRO, myenergi zappi, myenergi zappi GLO, Ohme Home Pro, Simpson & Partners Home Plus, Sync Energy EV Charger, VCHRGD Seven Pro, Wallbox Pulsar Max |
| Solar charging with no extra accessory | Yes | 17 of 26 | Andersen A3, Andersen Quartz, EO Mini Pro 3, Hive EV Charger (Sync Energy Wall Charger 2), Humax MX7, Hypervolt Home 3 Pro, Indra Smart LUX, Indra Smart PRO, Masterplug Smart EV Charger, myenergi zappi, myenergi zappi GLO, Ohme Home Pro, Pod Point Solo 3S, Simpson & Partners Home Plus, Sync Energy EV Charger, VCHRGD Seven Pro |
| 4G or mobile data, as standard or an option | Yes | 17 of 26 | Cord Zero, Easee One, EO Mini Pro 3, Hive EV Charger (Sync Energy Wall Charger 2), Humax MX7, Indra Smart LUX, Indra Smart PRO, Ohme Home Pro, Pod Point Solo 3S, Rolec EVO, Rolec WallPod, Rolec Zura, Sync Energy EV Charger, VCHRGD Seven Pro, Wallbox Quasar 2, Zaptec Go |
| Load management with no extra accessory | Yes | 21 of 26 | Andersen A3, Andersen Quartz, Cord Zero, EO Mini Pro 3, Hive EV Charger (Sync Energy Wall Charger 2), Humax MX7, Hypervolt Home 3 Pro, Indra Smart LUX, Indra Smart PRO, Masterplug Smart EV Charger, myenergi zappi, myenergi zappi GLO, Ohme Home Pro, Pod Point Solo 3S, Rolec EVO, Rolec WallPod, Rolec Zura, Simpson & Partners Home Plus, Sync Energy EV Charger, VCHRGD Seven Pro |
| PEN fault protection built in | Yes | 25 of 26 | Andersen A3, Andersen Quartz, Cord Zero, Easee One, EO Mini Pro 3, GivEnergy EV Charger, Hive EV Charger (Sync Energy Wall Charger 2), Humax MX7, Hypervolt Home 3 Pro, Indra Smart LUX, Indra Smart PRO, Masterplug Smart EV Charger, myenergi zappi, myenergi zappi GLO, Ohme Home Pro, Pod Point Solo 3S, Rolec EVO, Rolec WallPod, Rolec Zura, Simpson & Partners Home Plus, Sync Energy EV Charger, VCHRGD Seven Pro, Wallbox Pulsar Max, Zaptec Go |
| OCPP, for third-party charging platforms | No | 18 of 26 | Cord Zero, Easee One, EO Mini Pro 3, GivEnergy EV Charger, Hive EV Charger (Sync Energy Wall Charger 2), Humax MX7, Masterplug Smart EV Charger, myenergi zappi, myenergi zappi GLO, Rolec EVO, Rolec WallPod, Rolec Zura, Simpson & Partners Home Plus, Sync Energy EV Charger, VCHRGD Seven Pro, Wallbox Pulsar Max, Wallbox Quasar 2, Zaptec Go |
| An RFID card or key reader | Not stated | 16 of 26 | Cord Zero, Easee One, GivEnergy EV Charger, Humax MX7, Indra Smart LUX, Indra Smart PRO, myenergi zappi GLO, Rolec EVO, Rolec WallPod, Rolec Zura, Simpson & Partners Home Plus, Sync Energy EV Charger, VCHRGD Seven Pro, Wallbox Pulsar Max, Wallbox Quasar 2, Zaptec Go |
| Sold tethered and with a socket | No | 15 of 26 | Andersen Quartz, Cord Zero, EO Mini Pro 3, Hive EV Charger (Sync Energy Wall Charger 2), Humax MX7, Masterplug Smart EV Charger, myenergi zappi, myenergi zappi GLO, Pod Point Solo 3S, Rolec WallPod, Rolec Zura, Simpson & Partners Home Plus, Sync Energy EV Charger, VCHRGD Seven Pro, Wallbox Pulsar Max |
| An Ethernet port, as standard or an option | No | 15 of 26 | EO Mini Pro 3, GivEnergy EV Charger, Hive EV Charger (Sync Energy Wall Charger 2), Humax MX7, Hypervolt Home 3 Pro, Indra Smart LUX, Indra Smart PRO, Masterplug Smart EV Charger, myenergi zappi, Rolec EVO, Rolec WallPod, Rolec Zura, Simpson & Partners Home Plus, Sync Energy EV Charger, Wallbox Pulsar Max |
| IP65 or higher dust and water rating | No | 14 of 26 | Andersen A3, Andersen Quartz, GivEnergy EV Charger, Hive EV Charger (Sync Energy Wall Charger 2), Humax MX7, Hypervolt Home 3 Pro, Indra Smart LUX, Indra Smart PRO, Masterplug Smart EV Charger, myenergi zappi, myenergi zappi GLO, Rolec WallPod, Rolec Zura, Sync Energy EV Charger |
| A tethered cable option of 7.5 m or more | No | 11 of 26 | Andersen Quartz, Cord Zero, Humax MX7, Hypervolt Home 3 Pro, Indra Smart LUX, Ohme Home Pro, Rolec WallPod, Rolec Zura, Simpson & Partners Home Plus, Sync Energy EV Charger, VCHRGD Seven Pro |
| A warranty of 5 years or more | No | 9 of 26 | Andersen A3, Andersen Quartz, Cord Zero, Humax MX7, Pod Point Solo 3S, Rolec EVO, Simpson & Partners Home Plus, Wallbox Pulsar Max, Zaptec Go |
| A 22 kW three-phase version | No | 7 of 26 | Andersen Quartz, myenergi zappi, Rolec EVO, Rolec Zura, Simpson & Partners Home Plus, Sync Energy EV Charger, Wallbox Pulsar Max |
| Listed by Octopus, OVO and E.ON Next for their smart tariffs | No | 5 of 26 | Hypervolt Home 3 Pro, Indra Smart LUX, Indra Smart PRO, myenergi zappi, myenergi zappi GLO |
| Bidirectional (V2G or V2H) hardware | No | 1 of 26 | Wallbox Quasar 2 |

## Is the Ohme ePod compatible with Intelligent Octopus Go?

Yes. Octopus lists the Ohme ePod for Intelligent Octopus Go. E.ON Next does not list it and OVO does not list it. We checked all three lists in November 2026.

- **Intelligent Octopus Go:** listed. Octopus lists the Ohme ePod as a supported charger. Source: [Octopus Energy, Intelligent Octopus Go supported chargers](https://octopus.energy/smart/intelligent-octopus-go/)
- **E.ON Next Drive Smart:** not listed. Not on E.ON Next's charger list. E.ON Next Drive Smart can still work if your car is on E.ON Next's list. Source: [E.ON Next, Next Drive Smart supported chargers](https://www.eonnext.com/tariffs/next-drive/smart)
- **OVO Charge Anytime:** not listed. Not on OVO's charger list. Charge Anytime can still work if your car is on OVO's list and you have an OVO home supply. Source: [OVO Energy, Charge Anytime compatible EVs and smart chargers](https://www.ovoenergy.com/electric-cars/charge-anytime-cars-and-chargers)
- **Fixed-window tariffs** (E.ON Next Drive, Octopus Go, EDF GoElectric, So Energy So EV, Good Energy EV Charge, ScottishPower EV Saver, Ecotricity EcoFixed EV, British Gas EV Power, Sainsbury's EV) need only a timer on the charger or the car.

## Ohme ePod charging time and costs

The MG4 EV SE Long Range, 30% to 80%, at 7.4 kW: about 5h 21m, adding about 162 miles. Charging starts when each cheap window opens. Rates checked November 2026, including 0% VAT.

| Tariff | Cheap window | Cost of this charge | Note |
|---|---|---|---|
| Intelligent Octopus Go | 23:30 to 05:30 | £2.57 (cheapest we can be sure of) | Fits the 6-hour window |
| E.ON Next Drive Smart | 00:00 to 06:00 | £2.57 | Only if your car is on E.ON Next's list |
| E.ON Next Drive | 00:00 to 06:00 | £3.36 | Fits the 6-hour window |
| Octopus Go | 00:30 to 05:30 | £4.44 | 21m at the 37.90p day rate |
| EDF GoElectric | 23:00 to 06:00 | £2.63 | Fits the 7-hour window |
| So Energy So EV | 00:00 to 05:00 | £2.64+ | + 21m at a day rate shown only in a quote |
| Good Energy EV Charge | 00:00 to 05:00 | £2.77+ | + 21m at a day rate shown only in a quote |
| ScottishPower EV Saver | 02:00 to 05:00 | £8.44 | 2h 21m at the 37.75p day rate |
| Ecotricity EcoFixed EV | 00:00 to 05:00 | £4.03 | 21m at the 43.35p day rate |
| British Gas EV Power | 00:00 to 05:00 | £4.46 | 21m at the 36.90p day rate |
| Sainsbury's EV | 00:00 to 06:00 | £3.36 | Fits the 6-hour window |
| OVO Charge Anytime | Any time, EV only | £5.27 | Only if your car is on OVO's list |

We aim to show the latest rates, but tariff prices vary by location and can change daily. Always check current rates with the supplier directly before you switch.

## Ohme ePod specs and dimensions

| Spec | Value |
|---|---|
| Power | 7.4 kW, 32 A maximum (230 V AC, 50/60Hz, single-phase) |
| Connector | Type 2 socket (IEC 62196) (5 m and 8 m cables available as optional extras) |
| Protection | RCD Type A 30 mA with integral 6 mA DC; built-in PEN fault detector |
| Solar and load balancing | Enabled with a working CT clamp |
| Connectivity | 3G/4G multi-network SIM (4G model); Wi-Fi and Bluetooth (UK-only Wi-Fi model) (Data cost covered by Ohme for the first 3 years) |
| Controls | Three buttons, five-colour LED strip, Ohme app |
| Dimensions (H x W x D) | 230 x 140 x 100 mm |
| Weight | 1.5 kg |
| Ingress and impact | IP54, IK08 |
| Operating temperature | -25°C to 50°C |
| Mounting | Wall or post, indoor or outdoor |
| Colour | Black |
| Warranty | 3 years |

## Ohme ePod vs similar chargers

The chargers that share the most charger types with the Ohme ePod, then A to Z. In searches that reach us, people most often compare it with the Easee One, the EO Mini Pro 3.

- [Cord Zero](https://www.bestchargers.co.uk/cord-zero/). Both have: Solar charging, Untethered (socket), Smart tariff integration, Built-in 4G. Differences: Max power 7.36 kW (the Ohme ePod: 7.4 kW); Cable tethered or socket (the Ohme ePod: socket (untethered)); Solar charging yes, hardware not stated (the Ohme ePod: yes); Smart tariff lists 2 of 3 (the Ohme ePod: 1 of 3); Warranty 5 years (the Ohme ePod: 3 years); Bidirectional not stated by the maker (the Ohme ePod: no).
- [Hive EV Charger (Sync Energy Wall Charger 2)](https://www.bestchargers.co.uk/hive-sync-energy-2/). Both have: Solar charging, Untethered (socket), Smart tariff integration, Built-in 4G. Differences: Cable tethered or socket (the Ohme ePod: socket (untethered)); Bidirectional not stated by the maker (the Ohme ePod: no).
- [Indra Smart PRO](https://www.bestchargers.co.uk/indra-smart-pro/). Both have: Solar charging, Untethered (socket), Smart tariff integration, Built-in 4G. Differences: Smart tariff lists 3 of 3 (the Ohme ePod: 1 of 3).

## Ohme ePod features explained

### What is the Ohme ePod?

The ePod is Ohme's untethered home charger. It charges at up to 7.4 kW on a single-phase supply through a Type 2 socket, so you plug in your own cable. It has no screen and connects to Ohme's servers over a built-in mobile data SIM. Ohme's tethered alternative is the Home Pro.

### Charging power: 7.4 kW single-phase, no 22 kW version

The ePod is rated at 7.4 kW and 32 A maximum on a 230 V single-phase supply. There is no three-phase version. The rate your car charges at is also limited by its own onboard charger.

### Untethered: a Type 2 socket

The ePod has a Type 2 socket to IEC 62196. Ohme says it is compatible with Type 1 and Type 2 cars, using the appropriate cable, and sells 5 m and 8 m cables as optional extras.

### Solar charging with CT clamps

Ohme's May 2025 data sheet states that solar charging is enabled with a working CT clamp, and its installation guide lists one CT clamp in the box. The Ohme app's Solar Boost feature uses excess solar generation to charge the car.

### Smart charging with Octopus, E.ON Next and OVO

The Ohme app lets you start, stop and schedule charging, set a departure time and charge level, and connect your tariff so charging is scheduled into off-peak hours.

On the energy suppliers' own lists (checked 2 November 2026):

- **Octopus Energy** lists the Ohme ePod as supported for Intelligent Octopus Go.
- **OVO Energy** does not include Ohme in its list of compatible smart chargers for Charge Anytime.
- **E.ON Next** does not list Ohme for Next Drive Smart.

### Load balancing, earthing and installation

Dynamic load balancing is enabled with a working CT clamp. The ePod has an RCD Type A 30 mA with integral 6 mA DC detection and a built-in PEN fault detector. Overcurrent protection has to be fitted separately. It can be wall or post mounted, indoors or outdoors.

### App, Wi-Fi and connectivity

The data sheet lists a 3G/4G multi-network SIM card, with the data cost covered by Ohme for the first three years. Ohme's installation guide also lists a Wi-Fi and Bluetooth version for the UK only (EP0-07GB-WB-BLSTD-01), which has no SIM. Ethernet is not listed. The ePod is controlled with three buttons on the unit or the Ohme app, shows its status with a five-colour LED strip, and receives over-the-air updates.

### Size and dimensions: 230 x 140 x 100 mm

The ePod measures 230 x 140 x 100 mm (height x width x depth) and weighs 1.5 kg (Ohme's product page gives 1.48 kg). The fire-rated polycarbonate enclosure is rated IP54 and IK08, in black, and operates from -25°C to 50°C.

The data sheet lists compliance with the UK Smart Charging Regulations 2021 and approval for the OZEV EV chargepoint and Workplace Charging Scheme grants.

### Warranty: 3 years

Ohme gives a 3-year warranty as standard.

## Ohme ePod installation

- **Supply:** Single-phase, up to 7.4 kW
- **Earthing:** PEN fault protection built in, according to Ohme
- **Protection:** RCD Type A 30 mA with integral 6 mA DC; built-in PEN fault detector
- **Load management:** Yes: CT clamp in the box, for solar charging and load balancing
- **Solar sensor:** CT clamp in the box, for solar charging and load balancing
- **Connection:** 4G (4G model), Wi-Fi (Wi-Fi model) and Bluetooth (Wi-Fi model)

1. **Survey.** An installer checks your supply, consumer unit, main fuse and earthing, and where the charger and its cable will go. Many do this from photos first.
2. **Notify the network operator (DNO).** Your installer tells your local network operator (DNO) about the charger, and applies first where the supply needs checking.
3. **Fit and test.** The charger goes on its own circuit and is tested. Ask for the supply sensor for solar charging to be fitted on the same visit.
4. **Connect it.** The installer connects the charger to 4G, Wi-Fi or Bluetooth and sets it up in the maker's app.
5. **Set up your tariff.** If you switch to a smart tariff that lists it (Intelligent Octopus Go), add the charger in the supplier's app so it can schedule charging. On a fixed-window tariff, set a schedule for the cheap hours.

## Quick answers

- **Max power:** 7.4 kW single-phase.
- **Tethered or socket:** Type 2 socket (untethered).
- **Solar charging:** Yes. Solar charging and dynamic load balancing work when a CT clamp is fitted.
- **Intelligent Octopus Go:** Yes. Octopus lists the Ohme ePod as a supported charger (checked November 2026).
- **E.ON Next Drive Smart and OVO Charge Anytime:** Not on E.ON Next's Next Drive Smart list; not on OVO's Charge Anytime list (both checked 2 November 2026).
- **PEN fault protection:** Built in, according to Ohme. Your installer still confirms the earthing for your home.
- **Load management:** Yes. CT clamp in the box, for solar charging and load balancing.
- **Connectivity:** 4G (4G model), Wi-Fi (Wi-Fi model) and Bluetooth (Wi-Fi model).
- **Vehicle-to-grid or vehicle-to-home:** No.
- **Warranty:** 3 years.
- **Updated:** November 2026, from Ohme's own documents and the Octopus, OVO and E.ON Next charger lists.

## Ohme ePod FAQs

### Does the Ohme ePod come with a cable?

No. The ePod is untethered, with a Type 2 socket. Ohme offers 5 m and 8 m cables as optional extras, and says the ePod is compatible with Type 1 and Type 2 cars.

### What is the difference between the Ohme ePod and Home Pro?

The ePod has a Type 2 socket and no screen, and weighs 1.5 kg. The Home Pro has a tethered cable (5 m or 8 m) and a colour LCD screen, and weighs 4 kg. Both are 7.4 kW and have a 3-year warranty. The data sheet versions of both connect over a mobile data SIM, and Ohme also lists UK-only Wi-Fi and Bluetooth versions.

### Can the Ohme ePod charge from solar panels?

Ohme's May 2025 data sheet says dynamic load balancing and solar charging are enabled with a working CT clamp.

### Does the Ohme ePod work with Intelligent Octopus Go?

Octopus lists the Ohme ePod as a supported charger for Intelligent Octopus Go (checked 2 November 2026). Ohme is not on OVO's list for Charge Anytime or E.ON Next's list for Next Drive Smart on the same date.

### What does installing the Ohme ePod involve?

A qualified installer fits it on its own circuit, checks your supply and earthing, and notifies your network operator. Ohme lists built-in PEN fault protection. For solar charging, ask for the supply sensor to be fitted on the same visit.

### Which chargers are similar to the Ohme ePod?

Cord Zero, Hive EV Charger (Sync Energy Wall Charger 2) and Indra Smart PRO share the most charger types with it (such as solar charging, cable type and smart tariff listings). They are listed by how many types they share, then A to Z; this is not a ranking. Compare any two side by side on our compare page.

### Does the Ohme ePod support V2H or V2G?

No. Ohme does not publish vehicle-to-home (V2H) or vehicle-to-grid (V2G) support for the Ohme ePod, so it charges the car only.

### How much does the Ohme ePod cost?

We do not list prices, because they change often and most people buy a charger fitted, so the price depends on the installer and your home. Ask two or three installers for a fitted price for the Ohme ePod by name. If you rent, or own a flat with private off-street parking, the EV chargepoint grant can cover 75% of the cost of buying and installing a chargepoint, up to £500.

## EV charger terms explained

- **Untethered (socket) charger:** A charger with a Type 2 socket instead of a fixed cable, so you plug in your own charging cable.
- **Type 2:** The standard connector for AC charging on cars sold in the UK and Europe.
- **Single-phase and three-phase:** Most UK homes have a single-phase supply, which limits a home charger to about 7 kW (32 A). A 22 kW charger needs a three-phase supply, and the car must accept 22 kW on AC to use it.
- **kW and kWh:** kW is charging power; kWh is energy. A 7 kW charger adds up to about 7 kWh an hour, less charging losses.
- **Solar charging:** A mode that varies the charging current to follow surplus solar generation, measured by a sensor on your supply, so the car uses power you would otherwise export.
- **CT clamp:** A current sensor clipped around a supply cable. It tells the charger how much power the home is importing or exporting.
- **Load management:** The charger lowers its charging current when the rest of the home is using a lot of power, so the main fuse is not overloaded.
- **PEN fault protection:** Protection that disconnects the charger if the combined neutral and earth (PEN) conductor in the supply fails. Chargers with it built in can usually be installed without an earth rod; your installer confirms what your supply needs.
- **RCD and RCBO:** Devices that cut the power if current leaks to earth. Some chargers need a Type A RCD or RCBO fitted at the consumer unit; the maker's installation notes say which.
- **IP and IK ratings:** IP rates protection against dust and water (IP65 is dust tight and protected against water jets); IK rates impact resistance, from IK00 to IK10.
- **Vehicle-to-grid (V2G) and vehicle-to-home (V2H):** Sending power from the car's battery back to the grid or the home. It needs a bidirectional charger, a compatible car and approval from your network operator, and V2G also needs a supplier offer.
- **Smart tariff charger list:** The chargers an energy supplier says it can control for its smart EV tariff, such as Octopus's list for Intelligent Octopus Go. Suppliers add and remove chargers, so we show the date we checked.
- **EV chargepoint grant:** A GOV.UK grant for people who rent, or own a flat, with private off-street parking. It can cover 75% of the cost of buying and installing a chargepoint, up to £500 (checked 4 October 2026).

## Sources and how we check

- [Ohme, ePod and Home Pro installation guide (UK and IE)](https://ohme-ev.com/wp-content/uploads/2025/08/UK-IE_ePod_and_Home_Pro_Installation_Guide_Pages-Update_3_Feb_2025.pdf)
- [Ohme, ePod product data sheet, UK and IE (May 2025)](https://ohme-ev.com/wp-content/uploads/2023/07/ePod_Product_Data_Sheet_UK_and_IE_May_2025-1.pdf)
- [Ohme, charger comparison (Home Pro and ePod)](https://ohme-ev.com/product/ohme-home-pro/)
- [Octopus Energy, Intelligent Octopus Go supported chargers](https://octopus.energy/smart/intelligent-octopus-go/)
- [OVO Energy, Charge Anytime compatible EVs and smart chargers](https://www.ovoenergy.com/electric-cars/charge-anytime-cars-and-chargers)
- [E.ON Next, Next Drive Smart supported chargers](https://www.eonnext.com/tariffs/next-drive/smart)

Cite as: Best Chargers, "Ohme ePod EV charger review", specs checked November 2026, https://www.bestchargers.co.uk/ohme-epod/
