# Pod Point Solo 3S EV charger review

Source: https://www.bestchargers.co.uk/pod-point-solo-3/
Updated: October 2026
A feature comparison from the maker's own documents and the energy suppliers' lists. No scores, ratings or rankings.

The Pod Point Solo 3S is a home EV charger rated at up to 7.4 kW single-phase, sold tethered or with a Type 2 socket. It can charge from surplus solar, but it is not on the Octopus, OVO or E.ON Next smart tariff charger lists. Not included: 4G, Ethernet or RFID (not listed); vehicle-to-grid or vehicle-to-home.

## Pod Point Solo 3S at a glance: what is included

- Untethered (Type 2 socket) or tethered with a 6.5 m Type 2 cable
- Pod Point says charging is up to 7.4 kW; its install guide says units are typically rated at 7 kW and can be set to 7.4 kW on request
- A power balancing sensor (CT clamp) is supplied and must be installed; it enables solar charging
- Built-in PME fault protection, so Pod Point says no dedicated earth rod is needed on TN-S or TN-C-S supplies
- Pod Home app, Pod Rewards and access to Pod Power by EDF, Pod Point's EV tariff for its customers
- Pod Point quotes up to 5 years' warranty on charger and installation

**Included:** Power balancing sensor (CT clamp), which must be installed; Solar integration; Built-in PME fault protection; 6 mA DC protection inside the charger; Holster with the tethered version.

**Not included:** 4G, Ethernet or RFID (not listed); Listing on Octopus, OVO or E.ON Next smart tariff charger lists; Vehicle-to-grid or vehicle-to-home.

## Pod Point Solo 3S features compared with 26 chargers

Other chargers are listed A to Z; this is not a ranking.

| Feature | Pod Point Solo 3S | Chargers with it | Other chargers with it |
|---|---|---|---|
| A warranty of 5 years or more | Yes | 9 of 26 | Andersen A3, Andersen Quartz, Cord Zero, Humax MX7, Rolec EVO, Simpson & Partners Home Plus, Wallbox Pulsar Max, Zaptec Go |
| Sold tethered and with a socket | Yes | 14 of 26 | Andersen Quartz, Cord Zero, EO Mini Pro 3, Humax MX7, Masterplug Smart EV Charger, myenergi zappi, myenergi zappi GLO, Rolec WallPod, Rolec Zura, Simpson & Partners Home Plus, Sync Energy EV Charger, VCHRGD Seven Pro, Wallbox Pulsar Max |
| Load management with no extra accessory | Yes | 19 of 26 | Andersen A3, Andersen Quartz, Cord Zero, EO Mini Pro 3, Hive EV Charger (Sync Energy Wall Charger 2), Humax MX7, Hypervolt Home 3 Pro, Indra Smart PRO, Masterplug Smart EV Charger, myenergi zappi, myenergi zappi GLO, Ohme ePod, Ohme Home Pro, Rolec EVO, Rolec WallPod, Rolec Zura, Simpson & Partners Home Plus, VCHRGD Seven Pro |
| Solar charging with no extra accessory | Yes | 21 of 26 | Andersen A3, Andersen Quartz, Cord Zero, EO Mini Pro 3, GivEnergy EV Charger, Hive EV Charger (Sync Energy Wall Charger 2), Humax MX7, Hypervolt Home 3 Pro, Indra Smart LUX, Indra Smart PRO, Masterplug Smart EV Charger, myenergi zappi, myenergi zappi GLO, Ohme ePod, Ohme Home Pro, Rolec EVO, Rolec WallPod, Rolec Zura, Sync Energy EV Charger, VCHRGD Seven Pro |
| PEN fault protection built in | Yes | 21 of 26 | Andersen A3, Andersen Quartz, Cord Zero, Easee One, EO Mini Pro 3, GivEnergy EV Charger, Hive EV Charger (Sync Energy Wall Charger 2), Humax MX7, Hypervolt Home 3 Pro, Indra Smart LUX, Masterplug Smart EV Charger, myenergi zappi, myenergi zappi GLO, Ohme ePod, Ohme Home Pro, Rolec EVO, Rolec WallPod, Rolec Zura, Sync Energy EV Charger, VCHRGD Seven Pro |
| OCPP, for third-party charging platforms | No | 16 of 26 | Cord Zero, Easee One, EO Mini Pro 3, GivEnergy EV Charger, Hive EV Charger (Sync Energy Wall Charger 2), Masterplug Smart EV Charger, myenergi zappi, myenergi zappi GLO, Rolec EVO, Rolec WallPod, Rolec Zura, Simpson & Partners Home Plus, Sync Energy EV Charger, VCHRGD Seven Pro, Wallbox Pulsar Max, Zaptec Go |
| Listed for Intelligent Octopus Go | No | 15 of 26 | Andersen A3, Andersen Quartz, Cord Zero, Hive EV Charger (Sync Energy Wall Charger 2), Hypervolt Home 3 Pro, Indra Smart LUX, Indra Smart PRO, myenergi zappi, myenergi zappi GLO, Ohme ePod, Ohme Home Pro, Simpson & Partners Home Plus, Sync Energy EV Charger, VCHRGD Seven Pro, Wallbox Pulsar Max |
| 4G or mobile data, as standard or an option | No | 14 of 26 | Cord Zero, Easee One, EO Mini Pro 3, Hive EV Charger (Sync Energy Wall Charger 2), Indra Smart LUX, Indra Smart PRO, Ohme ePod, Ohme Home Pro, Rolec EVO, Rolec WallPod, Rolec Zura, Sync Energy EV Charger, VCHRGD Seven Pro, Zaptec Go |
| An Ethernet port, as standard or an option | No | 13 of 26 | EO Mini Pro 3, GivEnergy EV Charger, Hive EV Charger (Sync Energy Wall Charger 2), Hypervolt Home 3 Pro, Indra Smart LUX, Indra Smart PRO, Masterplug Smart EV Charger, myenergi zappi, Rolec EVO, Rolec WallPod, Rolec Zura, Simpson & Partners Home Plus, Sync Energy EV Charger |
| A tethered cable option of 7.5 m or more | No | 11 of 26 | Andersen Quartz, Cord Zero, Humax MX7, Hypervolt Home 3 Pro, Indra Smart LUX, Ohme Home Pro, Rolec WallPod, Rolec Zura, Simpson & Partners Home Plus, Sync Energy EV Charger, VCHRGD Seven Pro |
| IP65 or higher dust and water rating | No | 11 of 26 | Andersen A3, Andersen Quartz, GivEnergy EV Charger, Humax MX7, Hypervolt Home 3 Pro, Indra Smart LUX, Masterplug Smart EV Charger, myenergi zappi, myenergi zappi GLO, Rolec WallPod, Rolec Zura |
| An RFID card or key reader | No | 10 of 26 | Cord Zero, Easee One, Humax MX7, myenergi zappi GLO, Rolec EVO, Rolec WallPod, Rolec Zura, VCHRGD Seven Pro, Wallbox Quasar 2, Zaptec Go |
| A 22 kW three-phase version | No | 7 of 26 | Andersen Quartz, myenergi zappi, Rolec EVO, Rolec Zura, Simpson & Partners Home Plus, Wallbox Pulsar Max, Zaptec Go |
| Listed by Octopus, OVO and E.ON Next for their smart tariffs | No | 5 of 26 | Hypervolt Home 3 Pro, Indra Smart LUX, Indra Smart PRO, myenergi zappi, myenergi zappi GLO |
| Bidirectional (V2G or V2H) hardware | No | 1 of 26 | Wallbox Quasar 2 |

## Is the Pod Point Solo 3S compatible with Intelligent Octopus Go?

Not as a charger: Octopus does not list the Pod Point Solo 3S for Intelligent Octopus Go, though Octopus can connect through some cars instead. E.ON Next does not list it and OVO does not list it. We checked all three lists in October 2026.

- **Intelligent Octopus Go:** not listed. Not on Octopus's charger list. Intelligent Octopus Go can still work if your car is on Octopus's list. Source: [Octopus Energy, Intelligent Octopus Go supported chargers](https://octopus.energy/smart/intelligent-octopus-go/)
- **E.ON Next Drive Smart:** not listed. Not on E.ON Next's charger list. E.ON Next Drive Smart can still work if your car is on E.ON Next's list. Source: [E.ON Next, Next Drive Smart supported chargers](https://www.eonnext.com/tariffs/next-drive/smart)
- **OVO Charge Anytime:** not listed. Not on OVO's charger list. Charge Anytime can still work if your car is on OVO's list and you have an OVO home supply. Source: [OVO Energy, Charge Anytime compatible EVs and smart chargers](https://www.ovoenergy.com/electric-cars/charge-anytime-cars-and-chargers)
- **Fixed-window tariffs** (E.ON Next Drive, Octopus Go, EDF GoElectric, So Energy So EV, Good Energy EV Charge, ScottishPower EV Saver, Ecotricity EcoFixed EV, British Gas EV Power, Sainsbury's EV) need only a timer on the charger or the car.

## Pod Point Solo 3S charging time and costs

The MG4 EV SE Long Range, 30% to 80%, at 7.4 kW: about 5h 21m, adding about 162 miles. Charging starts when each cheap window opens. Rates checked October 2026, including 0% VAT.

| Tariff | Cheap window | Cost of this charge | Note |
|---|---|---|---|
| Intelligent Octopus Go | 23:30 to 05:30 | £3.16 | Only if your car is on Octopus's list |
| E.ON Next Drive Smart | 00:00 to 06:00 | £2.57 | Only if your car is on E.ON Next's list |
| E.ON Next Drive | 00:00 to 06:00 | £3.36 | Fits the 6-hour window |
| Octopus Go | 00:30 to 05:30 | £4.42 | 21m at the 36.90p day rate |
| EDF GoElectric | 23:00 to 06:00 | £2.63 (cheapest we can be sure of) | Fits the 7-hour window |
| So Energy So EV | 00:00 to 05:00 | £2.64+ | + 21m at a day rate shown only in a quote |
| Good Energy EV Charge | 00:00 to 05:00 | £2.82+ | + 21m at a day rate shown only in a quote |
| ScottishPower EV Saver | 02:00 to 05:00 | £7.82 | 2h 21m at the 34.22p day rate |
| Ecotricity EcoFixed EV | 00:00 to 05:00 | £3.86 | 21m at the 36.57p day rate |
| British Gas EV Power | 00:00 to 05:00 | £4.46 | 21m at the 36.90p day rate |
| Sainsbury's EV | 00:00 to 06:00 | £3.36 | Fits the 6-hour window |
| OVO Charge Anytime | Any time, EV only | £5.27 | Only if your car is on OVO's list |

We aim to show the latest rates, but tariff prices vary by location and can change daily. Always check current rates with the supplier directly before you switch.

## Pod Point Solo 3S specs

| Spec | Value |
|---|---|
| Power | Up to 7.4 kW (Typically rated at 7 kW; 7.4 kW on request. Up to 32 A per phase) |
| Connector | Type 2 socket (Universal) or tethered Type 2, 6.5 m |
| Load management | Power balancing sensor (CT clamp) supplied, must be installed |
| Solar charging | Yes, using the power balancing sensor |
| Protection | 6 mA DC protection in the charger; built-in PME fault protection (External 30 mA RCD (Type A, B or F) required) |
| Connectivity | Wi-Fi (2.4 GHz) |
| App | Pod Home app |
| Dimensions (H x W x D) | Socket 330 x 290 x 167 mm; tethered 330 x 290 x 112 mm |
| Weight | Socket 3.5 kg; tethered 4.7 kg |
| Ingress and impact | IP54, IK10 |
| Operating temperature | -25°C to 40°C |
| Earthing systems | TN-S, TN-C-S or TT |
| Warranty | Up to 5 years on charger and installation (Pod Point) |

## Pod Point Solo 3S vs similar chargers

The chargers that share the most charger types with the Pod Point Solo 3S, then A to Z. In searches that reach us, people most often compare it with the Ohme Home Pro.

- [Andersen Quartz](https://www.bestchargers.co.uk/andersen-quartz/). Both have: Solar charging, Tethered, Untethered (socket). Differences: Max power 7 kW or 22 kW (the Pod Point Solo 3S: 7.4 kW); Smart tariff lists 2 of 3 (the Pod Point Solo 3S: 0 of 3); Warranty 7 years (the Pod Point Solo 3S: up to 5 years).
- [Cord Zero](https://www.bestchargers.co.uk/cord-zero/). Both have: Solar charging, Tethered, Untethered (socket). Differences: Max power 7.36 kW (the Pod Point Solo 3S: 7.4 kW); Smart tariff lists 2 of 3 (the Pod Point Solo 3S: 0 of 3); 4G yes (the Pod Point Solo 3S: no); Warranty 5 years (the Pod Point Solo 3S: up to 5 years).
- [EO Mini Pro 3](https://www.bestchargers.co.uk/eo-mini-pro-3/). Both have: Solar charging, Tethered, Untethered (socket). Differences: Max power 7.2 kW (the Pod Point Solo 3S: 7.4 kW); 4G yes (the Pod Point Solo 3S: no); Warranty not published (the Pod Point Solo 3S: up to 5 years).

## Pod Point Solo 3S features explained

### What is the Pod Point Solo 3S?

The Solo 3S is Pod Point's home charger, sold through its site, now branded Pod (podenergy.com). It comes untethered with a Type 2 socket or tethered with a 6.5 m cable. Pod Point says it has installed over 300,000 chargers in the UK, and that the Solo 3S was named What Car? Best Value Home Charger 2025.

### Charging power: 7.4 kW single-phase

Pod Point advertises charging speeds of up to 7.4 kW. Its installation guide adds that the chargers are typically rated at 7 kW for performance and longevity, and that the rating can be increased to 7.4 kW on request. The guide lists a rated voltage of 230 V (400 V) and up to 32 A per phase. The rate your car charges at is also limited by its own onboard charger.

### Tethered or untethered: the cable options

The Universal (untethered) version has a Type 2 socket and connects to any car with the right cable. The tethered version has a 6.5 m Type 2 cable and comes with a holster.

### Solar charging with CT clamps

Pod Point lists solar integration, so you can charge with energy your home generates. Its install guide says the power balancing sensor (CT clamp) supplied with the charger lets customers use features such as solar charging.

### Smart charging with Octopus, E.ON Next and OVO

The Pod Home app schedules charging to a target charge level and ready-by time, has a Boost function to charge immediately, manages multiple vehicles and can secure the charger. Pod Point customers can earn Pod Rewards for smart charging, and have access to Pod Power by EDF, which Pod Point describes as an exclusive EV tariff for its customers.

On the energy suppliers' own lists (checked 4 October 2026), Pod Point is not listed by Octopus for Intelligent Octopus Go, by OVO for Charge Anytime, or by E.ON Next for Next Drive Smart.

### Load balancing, earthing and installation

A power balancing sensor (CT clamp) is supplied in the box and must be installed. Pod Point says it protects the upstream main fuse by letting the charger reduce its rate when needed. The charger provides 6 mA DC protection; an external 30 mA RCD (Type A, B or F, switching both poles) is required.

Pod Point's earthing information sheet says the Solo 3S has built-in PME fault protection, so no dedicated earth rod is required on TN-S and TN-C-S earthing systems. TT systems already have an earth rod and have additional RCD requirements.

### App, Wi-Fi and connectivity

The install guide lists Wi-Fi (2.4 GHz). The charger is registered with the Pod Point Installer App at installation and controlled through the Pod Home app.

### Size, dimensions and weatherproofing

The Universal version measures 330 x 290 x 167 mm and weighs 3.5 kg; the tethered version measures 330 x 290 x 112 mm and weighs 4.7 kg (height x width x depth). Both are rated IP54 and IK10 and operate from -25°C to 40°C, with charging speeds reduced at high temperatures to protect the device.

### Warranty: Up to 5 years

Pod Point quotes up to 5 years' warranty on charger and installation, with 24/7 support. Check which term applies to your purchase route before you buy.

## Pod Point Solo 3S installation

- **Supply:** Single-phase, up to 7.4 kW
- **Earthing:** PEN fault protection built in, according to Pod Point
- **Protection:** 6 mA DC protection in the charger; built-in PME fault protection; external 30 mA RCD (Type A, B or F) required
- **Load management:** Yes: power balancing sensor (CT clamp), which must be installed
- **Solar sensor:** Power balancing sensor (CT clamp), which must be installed
- **Connection:** Wi-Fi

1. **Survey.** An installer checks your supply, consumer unit, main fuse and earthing, and where the charger and its cable will go. Many do this from photos first.
2. **Notify the network operator (DNO).** Your installer tells your local network operator (DNO) about the charger, and applies first where the supply needs checking.
3. **Fit and test.** The charger goes on its own circuit and is tested. Ask for the supply sensor for solar charging to be fitted on the same visit.
4. **Connect it.** The installer connects the charger to Wi-Fi and sets it up in the maker's app.
5. **Set up your tariff.** Set a charging schedule for your tariff's cheap hours. Smart tariffs that control the charger directly do not list it, but some work through a compatible car.

## Quick answers

- **Max power:** Up to 7.4 kW single-phase.
- **Tethered or socket:** Type 2 socket or tethered 6.5 m.
- **Solar charging:** Yes. A power balancing sensor (CT clamp) is supplied and must be installed; it enables solar charging.
- **Intelligent Octopus Go:** It is not on Octopus's list of supported chargers (checked October 2026). Intelligent Octopus Go can still work through a compatible car, and Octopus Go works with any charger set to a timer.
- **E.ON Next Drive Smart and OVO Charge Anytime:** Not on E.ON Next's Next Drive Smart list; not on OVO's Charge Anytime list (both checked 4 October 2026).
- **PEN fault protection:** Built in, according to Pod Point. Your installer still confirms the earthing for your home.
- **Load management:** Yes. Power balancing sensor (CT clamp), which must be installed.
- **Connectivity:** Wi-Fi.
- **Vehicle-to-grid or vehicle-to-home:** No.
- **Warranty:** Up to 5 years, on charger and installation (Pod Point).
- **Updated:** October 2026, from Pod Point's own documents and the Octopus, OVO and E.ON Next charger lists.

## Pod Point Solo 3S FAQs

### Is the Pod Point Solo 3S 7 kW or 7.4 kW?

Pod Point advertises charging speeds of up to 7.4 kW. Its installation guide says the chargers are typically rated at 7 kW for performance and longevity, and the rating can be increased to 7.4 kW on request.

### Does the Pod Point Solo 3S need an earth rod?

Pod Point says the Solo 3S has built-in PME fault protection, so no dedicated earth rod is required on TN-S and TN-C-S earthing systems. TT systems already have an earth rod and have additional RCD requirements.

### Can the Pod Point Solo 3S charge from solar?

Pod Point lists solar integration. Its install guide says the supplied power balancing sensor (CT clamp) protects the main fuse and lets customers use features such as solar charging.

### What is Pod Power by EDF?

Pod Point describes Pod Power by EDF as an exclusive EV tariff for Pod customers. Check EDF's current rates and terms before switching.

### Does the Pod Point Solo 3S work with Intelligent Octopus Go?

Pod Point is not on Octopus's list of supported chargers for Intelligent Octopus Go (checked 4 October 2026). Octopus can also connect through some cars instead of the charger.

### Which chargers are similar to the Pod Point Solo 3S?

Andersen Quartz, Cord Zero and EO Mini Pro 3 share the most charger types with it (such as solar charging, cable type and smart tariff listings). They are listed by how many types they share, then A to Z; this is not a ranking. Compare any two side by side on our compare page.

### Does the Pod Point Solo 3S support V2H or V2G?

No. Pod Point does not publish vehicle-to-home (V2H) or vehicle-to-grid (V2G) support for the Pod Point Solo 3S, so it charges the car only.

### How much does the Pod Point Solo 3S cost?

We do not list prices, because they change often and most people buy a charger fitted, so the price depends on the installer and your home. Ask two or three installers for a fitted price for the Pod Point Solo 3S by name. If you rent, or own a flat with private off-street parking, the EV chargepoint grant can cover 75% of the cost of buying and installing a chargepoint, up to £500.

## EV charger terms explained

- **Tethered charger:** A charger with the charging cable fixed to the unit.
- **Untethered (socket) charger:** A charger with a Type 2 socket instead of a fixed cable, so you plug in your own charging cable.
- **Type 2:** The standard connector for AC charging on cars sold in the UK and Europe.
- **Single-phase and three-phase:** Most UK homes have a single-phase supply, which limits a home charger to about 7 kW (32 A). A 22 kW charger needs a three-phase supply, and the car must accept 22 kW on AC to use it.
- **kW and kWh:** kW is charging power; kWh is energy. A 7 kW charger adds up to about 7 kWh an hour, less charging losses.
- **Solar charging:** A mode that varies the charging current to follow surplus solar generation, measured by a sensor on your supply, so the car uses power you would otherwise export.
- **CT clamp:** A current sensor clipped around a supply cable. It tells the charger how much power the home is importing or exporting.
- **Load management:** The charger lowers its charging current when the rest of the home is using a lot of power, so the main fuse is not overloaded.
- **PEN fault protection:** Protection that disconnects the charger if the combined neutral and earth (PEN) conductor in the supply fails. Chargers with it built in can usually be installed without an earth rod; your installer confirms what your supply needs.
- **RFID:** A card or key fob reader on the charger, used to stop other people starting a charge.
- **IP and IK ratings:** IP rates protection against dust and water (IP65 is dust tight and protected against water jets); IK rates impact resistance, from IK00 to IK10.
- **Vehicle-to-grid (V2G) and vehicle-to-home (V2H):** Sending power from the car's battery back to the grid or the home. It needs a bidirectional charger, a compatible car and approval from your network operator, and V2G also needs a supplier offer.
- **Smart tariff charger list:** The chargers an energy supplier says it can control for its smart EV tariff, such as Octopus's list for Intelligent Octopus Go. Suppliers add and remove chargers, so we show the date we checked.
- **EV chargepoint grant:** A GOV.UK grant for people who rent, or own a flat, with private off-street parking. It can cover 75% of the cost of buying and installing a chargepoint, up to £500 (checked 4 October 2026).

## Sources and how we check

- [Pod Point, Solo 3S home EV charger](https://podenergy.com/products/solo-home-ev-charger)
- [Pod Point, Solo 3S UK domestic install guide PP-2300436-6](https://podenergy.com/technical/installation)
- [Pod Point, Earthing Systems Information Sheet PP-D-200317-5](https://cdn-www.pod-point.com/Earthing-Systems-Information-Sheet-PP-D-200317-5.pdf)
- [Octopus Energy, Intelligent Octopus Go supported chargers](https://octopus.energy/smart/intelligent-octopus-go/)
- [E.ON Next, Next Drive Smart supported chargers](https://www.eonnext.com/tariffs/next-drive/smart)
- [OVO Energy, Charge Anytime compatible EVs and smart chargers](https://www.ovoenergy.com/electric-cars/charge-anytime-cars-and-chargers)

Cite as: Best Chargers, "Pod Point Solo 3S EV charger review", specs checked October 2026, https://www.bestchargers.co.uk/pod-point-solo-3/