# myenergi zappi GLO EV charger review

Source: https://www.bestchargers.co.uk/zappi-glo/
Updated: October 2026
A feature comparison from the maker's own documents and the energy suppliers' lists. No scores, ratings or rankings.

The myenergi zappi GLO is a home EV charger rated at 7 kW single-phase, sold tethered or with a Type 2 socket. It can charge from surplus solar, and Octopus, E.ON Next and OVO all list it for their smart EV tariffs. Not included: screen or on-unit display; three-phase or 22 kW version; Ethernet or 4G.

## myenergi zappi GLO at a glance: what is included

- 7 kW single-phase only, with a tethered 6.5 m Type 2 cable or a Type 2 socket
- No screen: settings are managed in the myenergi app
- Smart Mode follows schedules, responds to dynamic tariffs and uses surplus solar; Charge Now charges at full power
- RFID access key supplied, supporting up to 126 users
- PEN fault protection is integrated on GB (-G) models
- 3-year warranty as standard; myenergi sells an extension that takes it to 5 years

**Included:** Smart Mode with surplus solar charging; RFID access key (Mifare Classic) supplied; Optional limit on current drawn from the supply; PEN fault protection on -G models; Wi-Fi and Bluetooth; Tamper detection.

**Not included:** Screen or on-unit display; Three-phase or 22 kW version; Ethernet or 4G; Vehicle-to-grid or vehicle-to-home.

## myenergi zappi GLO features compared with 26 chargers

Other chargers are listed A to Z; this is not a ranking.

| Feature | myenergi zappi GLO | Chargers with it | Other chargers with it |
|---|---|---|---|
| Listed by Octopus, OVO and E.ON Next for their smart tariffs | Yes | 5 of 26 | Hypervolt Home 3 Pro, Indra Smart LUX, Indra Smart PRO, myenergi zappi |
| An RFID card or key reader | Yes | 10 of 26 | Cord Zero, Easee One, Humax MX7, Rolec EVO, Rolec WallPod, Rolec Zura, VCHRGD Seven Pro, Wallbox Quasar 2, Zaptec Go |
| IP65 or higher dust and water rating | Yes | 11 of 26 | Andersen A3, Andersen Quartz, GivEnergy EV Charger, Humax MX7, Hypervolt Home 3 Pro, Indra Smart LUX, Masterplug Smart EV Charger, myenergi zappi, Rolec WallPod, Rolec Zura |
| Sold tethered and with a socket | Yes | 14 of 26 | Andersen Quartz, Cord Zero, EO Mini Pro 3, Humax MX7, Masterplug Smart EV Charger, myenergi zappi, Pod Point Solo 3S, Rolec WallPod, Rolec Zura, Simpson & Partners Home Plus, Sync Energy EV Charger, VCHRGD Seven Pro, Wallbox Pulsar Max |
| Listed for Intelligent Octopus Go | Yes | 15 of 26 | Andersen A3, Andersen Quartz, Cord Zero, Hive EV Charger (Sync Energy Wall Charger 2), Hypervolt Home 3 Pro, Indra Smart LUX, Indra Smart PRO, myenergi zappi, Ohme ePod, Ohme Home Pro, Simpson & Partners Home Plus, Sync Energy EV Charger, VCHRGD Seven Pro, Wallbox Pulsar Max |
| OCPP, for third-party charging platforms | Yes | 16 of 26 | Cord Zero, Easee One, EO Mini Pro 3, GivEnergy EV Charger, Hive EV Charger (Sync Energy Wall Charger 2), Masterplug Smart EV Charger, myenergi zappi, Rolec EVO, Rolec WallPod, Rolec Zura, Simpson & Partners Home Plus, Sync Energy EV Charger, VCHRGD Seven Pro, Wallbox Pulsar Max, Zaptec Go |
| Load management with no extra accessory | Yes | 19 of 26 | Andersen A3, Andersen Quartz, Cord Zero, EO Mini Pro 3, Hive EV Charger (Sync Energy Wall Charger 2), Humax MX7, Hypervolt Home 3 Pro, Indra Smart PRO, Masterplug Smart EV Charger, myenergi zappi, Ohme ePod, Ohme Home Pro, Pod Point Solo 3S, Rolec EVO, Rolec WallPod, Rolec Zura, Simpson & Partners Home Plus, VCHRGD Seven Pro |
| Solar charging with no extra accessory | Yes | 21 of 26 | Andersen A3, Andersen Quartz, Cord Zero, EO Mini Pro 3, GivEnergy EV Charger, Hive EV Charger (Sync Energy Wall Charger 2), Humax MX7, Hypervolt Home 3 Pro, Indra Smart LUX, Indra Smart PRO, Masterplug Smart EV Charger, myenergi zappi, Ohme ePod, Ohme Home Pro, Pod Point Solo 3S, Rolec EVO, Rolec WallPod, Rolec Zura, Sync Energy EV Charger, VCHRGD Seven Pro |
| PEN fault protection built in | Yes | 21 of 26 | Andersen A3, Andersen Quartz, Cord Zero, Easee One, EO Mini Pro 3, GivEnergy EV Charger, Hive EV Charger (Sync Energy Wall Charger 2), Humax MX7, Hypervolt Home 3 Pro, Indra Smart LUX, Masterplug Smart EV Charger, myenergi zappi, Ohme ePod, Ohme Home Pro, Pod Point Solo 3S, Rolec EVO, Rolec WallPod, Rolec Zura, Sync Energy EV Charger, VCHRGD Seven Pro |
| 4G or mobile data, as standard or an option | No | 14 of 26 | Cord Zero, Easee One, EO Mini Pro 3, Hive EV Charger (Sync Energy Wall Charger 2), Indra Smart LUX, Indra Smart PRO, Ohme ePod, Ohme Home Pro, Rolec EVO, Rolec WallPod, Rolec Zura, Sync Energy EV Charger, VCHRGD Seven Pro, Zaptec Go |
| An Ethernet port, as standard or an option | No | 13 of 26 | EO Mini Pro 3, GivEnergy EV Charger, Hive EV Charger (Sync Energy Wall Charger 2), Hypervolt Home 3 Pro, Indra Smart LUX, Indra Smart PRO, Masterplug Smart EV Charger, myenergi zappi, Rolec EVO, Rolec WallPod, Rolec Zura, Simpson & Partners Home Plus, Sync Energy EV Charger |
| A tethered cable option of 7.5 m or more | No | 11 of 26 | Andersen Quartz, Cord Zero, Humax MX7, Hypervolt Home 3 Pro, Indra Smart LUX, Ohme Home Pro, Rolec WallPod, Rolec Zura, Simpson & Partners Home Plus, Sync Energy EV Charger, VCHRGD Seven Pro |
| A warranty of 5 years or more | No | 9 of 26 | Andersen A3, Andersen Quartz, Cord Zero, Humax MX7, Pod Point Solo 3S, Rolec EVO, Simpson & Partners Home Plus, Wallbox Pulsar Max, Zaptec Go |
| A 22 kW three-phase version | No | 7 of 26 | Andersen Quartz, myenergi zappi, Rolec EVO, Rolec Zura, Simpson & Partners Home Plus, Wallbox Pulsar Max, Zaptec Go |
| Bidirectional (V2G or V2H) hardware | No | 1 of 26 | Wallbox Quasar 2 |

## Is the myenergi zappi GLO compatible with Intelligent Octopus Go?

Yes. Octopus lists the myenergi zappi GLO for Intelligent Octopus Go. E.ON Next lists it and OVO lists it. We checked all three lists in October 2026.

- **Intelligent Octopus Go:** listed. Octopus lists the myenergi zappi GLO as a supported charger. Source: [Octopus Energy, Intelligent Octopus Go supported chargers](https://octopus.energy/smart/intelligent-octopus-go/)
- **E.ON Next Drive Smart:** listed. E.ON Next lists the myenergi zappi GLO as a supported charger. Source: [E.ON Next, Next Drive Smart supported chargers](https://www.eonnext.com/tariffs/next-drive/smart)
- **OVO Charge Anytime:** listed. OVO lists the myenergi zappi GLO as a supported charger. Source: [OVO Energy, Charge Anytime compatible EVs and smart chargers](https://www.ovoenergy.com/electric-cars/charge-anytime-cars-and-chargers)
- **Fixed-window tariffs** (E.ON Next Drive, Octopus Go, EDF GoElectric, So Energy So EV, Good Energy EV Charge, ScottishPower EV Saver, Ecotricity EcoFixed EV, British Gas EV Power, Sainsbury's EV) need only a timer on the charger or the car.

## myenergi zappi GLO charging time and costs

The MG4 EV SE Long Range, 30% to 80%, at 7 kW: about 5h 39m, adding about 162 miles. Charging starts when each cheap window opens. Rates checked October 2026, including 0% VAT.

| Tariff | Cheap window | Cost of this charge | Note |
|---|---|---|---|
| Intelligent Octopus Go | 23:30 to 05:30 | £3.16 | Fits the 6-hour window |
| E.ON Next Drive Smart | 00:00 to 06:00 | £2.57 (cheapest we can be sure of) | Fits the 6-hour window |
| E.ON Next Drive | 00:00 to 06:00 | £3.36 | Fits the 6-hour window |
| Octopus Go | 00:30 to 05:30 | £4.97 | 39m at the 36.90p day rate |
| EDF GoElectric | 23:00 to 06:00 | £2.63 | Fits the 7-hour window |
| So Energy So EV | 00:00 to 05:00 | £2.50+ | + 39m at a day rate shown only in a quote |
| Good Energy EV Charge | 00:00 to 05:00 | £2.67+ | + 39m at a day rate shown only in a quote |
| ScottishPower EV Saver | 02:00 to 05:00 | £8.13 | 2h 39m at the 34.22p day rate |
| Ecotricity EcoFixed EV | 00:00 to 05:00 | £4.43 | 39m at the 36.57p day rate |
| British Gas EV Power | 00:00 to 05:00 | £5.00 | 39m at the 36.90p day rate |
| Sainsbury's EV | 00:00 to 06:00 | £3.36 | Fits the 6-hour window |
| OVO Charge Anytime | Any time, EV only | £5.27 | EV-only rate, any time |

We aim to show the latest rates, but tariff prices vary by location and can change daily. Always check current rates with the supplier directly before you switch.

## myenergi zappi GLO specs and dimensions

| Spec | Value |
|---|---|
| Power | 7 kW single-phase (230 V, 32 A maximum, adjustable from 6 A to 32 A) |
| Models | ZAPPI-3AS07T-G (tethered), ZAPPI-3AS07U-G (socket) |
| Connector | Tethered Type 2 cable (6.5 m) or Type 2 socket with locking |
| Solar charging | Yes, in Smart Mode |
| Load management | Optional limit on current drawn from the supply or grid |
| Protection | 6 mA DC residual current protection (RDC-DD, EN 62955) (PEN fault protection integrated on -G models) |
| Connectivity | Wi-Fi (2.4 GHz), Bluetooth LE 4.2, 868 MHz radio |
| Access control | RFID (13.56 MHz, Mifare Classic), card supplied, up to 126 users |
| OCPP | OCPP 1.6J via the myenergi backend (Not available for offline or local use) |
| Dimensions | 350 x 170 x 160 mm |
| Weight | 4.1 kg tethered, 3.1 kg socket |
| Ingress and impact | IP65, IK10 |
| Operating temperature | -25°C to +40°C (Current derates at 50°C) |
| Warranty | 3 years, extendable to 5 |

## myenergi zappi GLO vs similar chargers

The chargers that share the most charger types with the myenergi zappi GLO, then A to Z. In searches that reach us, people most often compare it with the myenergi zappi.

- [Andersen Quartz](https://www.bestchargers.co.uk/andersen-quartz/). Both have: Solar charging, Tethered, Untethered (socket), Smart tariff integration. Differences: Max power 7 kW or 22 kW (the myenergi zappi GLO: 7 kW); Smart tariff lists 2 of 3 (the myenergi zappi GLO: 3 of 3); Warranty 7 years (the myenergi zappi GLO: 3 years).
- [Cord Zero](https://www.bestchargers.co.uk/cord-zero/). Both have: Solar charging, Tethered, Untethered (socket), Smart tariff integration. Differences: Max power 7.36 kW (the myenergi zappi GLO: 7 kW); Smart tariff lists 2 of 3 (the myenergi zappi GLO: 3 of 3); 4G yes (the myenergi zappi GLO: no); Warranty 5 years (the myenergi zappi GLO: 3 years).
- [myenergi zappi](https://www.bestchargers.co.uk/zappi-charger/). Both have: Solar charging, Tethered, Untethered (socket), Smart tariff integration. Differences: Max power 7 kW or 22 kW (the myenergi zappi GLO: 7 kW).

## myenergi zappi GLO features explained

### What is the myenergi zappi GLO?

The zappi GLO is a 7 kW single-phase home charger from myenergi. It has no screen; it is commissioned with myenergi's Installer Assistant app and then controlled through the myenergi app. It comes with a tethered 6.5 m Type 2 cable or a Type 2 socket, and myenergi says it is designed and manufactured in Britain.

### Charging power: 7 kW single-phase, no 22 kW version

The GLO charges at up to 7 kW on a 230 V single-phase supply (32 A maximum, variable from 6 A to 32 A). There is no three-phase version. The rate your car charges at is also limited by its own onboard charger.

### Tethered or untethered: the cable options

The tethered version (ZAPPI-3AS07T-G) has a 6.5 m Type 2 cable. The socket version (ZAPPI-3AS07U-G) has a Type 2 socket with a locking system, so you plug in your own cable. At the time of checking, myenergi's own shop listed the tethered version for sale.

### Solar charging and charging modes

According to myenergi's quick start guide, the GLO has two charging methods:

- **Smart Mode** follows schedules, responds to dynamic tariffs and uses surplus solar energy when available. With Smart Mode turned off, the charger delivers full power until the car is charged, while still prioritising solar if available.
- **Charge Now** starts an immediate full-power charge, from the app or by tapping the access key. Smart Mode resumes afterwards.

Out of the box, Smart Mode follows a built-in schedule from midnight to 8am, Monday to Friday, which can be edited or deleted in the app. The datasheet lists support for up to two external current sensors.

### Smart charging with Octopus, E.ON Next and OVO

Three energy suppliers list the zappi range on their own compatibility lists (checked 4 October 2026):

- **Octopus Energy** lists "zappi (all models)" for Intelligent Octopus Go.
- **OVO Energy** lists myenergi for Charge Anytime.
- **E.ON Next** lists zappi for Next Drive Smart.

### Load balancing, earthing and installation

The datasheet lists an optional feature that regulates the current drawn from the supply or grid to prevent overload. Integral protection is 6 mA DC residual current protection (RDC-DD, to EN 62955), and PEN fault protection is integrated on the -G (GB) models. The enclosure has microswitch tamper detection.

### Connectivity and access

The GLO has Wi-Fi (2.4 GHz), Bluetooth LE 4.2 and myenergi's 868 MHz radio. OCPP 1.6J is supported through the myenergi backend, not for offline or local use. An RFID access key is supplied. With Charging Lock enabled, a key is needed to start charging; myenergi says the system supports up to 126 users, each identified separately.

### Size and dimensions: 350 x 170 x 160 mm

The enclosure measures 350 x 170 x 160 mm and weighs 4.1 kg (tethered) or 3.1 kg (socket). It is polycarbonate, rated IP65 and IK10, and operates from -25°C to +40°C, with current derating at 50°C. Standby consumption is 3 W.

### Warranty: 3 years

The zappi GLO has a 3-year warranty as standard. myenergi's extended warranty covers the zappi GLO and takes the total to 5 years when bought within three months of the standard warranty expiring.

## myenergi zappi GLO installation

- **Supply:** Single-phase, up to 7 kW
- **Earthing:** PEN fault protection built in, according to myenergi
- **Protection:** 6 mA DC residual current protection (RDC-DD, EN 62955); PEN fault protection integrated on -G models
- **Load management:** Yes: optional limit on current drawn from the supply
- **Solar sensor:** Ask which sensor the solar mode uses
- **Connection:** Wi-Fi and Bluetooth

1. **Survey.** An installer checks your supply, consumer unit, main fuse and earthing, and where the charger and its cable will go. Many do this from photos first.
2. **Notify the network operator (DNO).** Your installer tells your local network operator (DNO) about the charger, and applies first where the supply needs checking.
3. **Fit and test.** The charger goes on its own circuit and is tested. Ask for the supply sensor for solar charging to be fitted on the same visit.
4. **Connect it.** The installer connects the charger to Wi-Fi or Bluetooth and sets it up in the maker's app.
5. **Set up your tariff.** If you switch to a smart tariff that lists it (Intelligent Octopus Go, E.ON Next Drive Smart, OVO Charge Anytime), add the charger in the supplier's app so it can schedule charging. On a fixed-window tariff, set a schedule for the cheap hours.

## Quick answers

- **Max power:** 7 kW single-phase.
- **Tethered or socket:** Tethered 6.5 m or Type 2 socket.
- **Solar charging:** Yes. Smart Mode follows schedules, responds to dynamic tariffs and uses surplus solar; Charge Now charges at full power.
- **Intelligent Octopus Go:** Yes. Octopus lists the myenergi zappi GLO as a supported charger (checked October 2026).
- **E.ON Next Drive Smart and OVO Charge Anytime:** E.ON Next lists it for Next Drive Smart; OVO lists it for Charge Anytime (both checked 4 October 2026).
- **PEN fault protection:** Built in, according to myenergi. Your installer still confirms the earthing for your home.
- **Load management:** Yes. Optional limit on current drawn from the supply.
- **Connectivity:** Wi-Fi and Bluetooth; OCPP 1.6J (via myenergi backend).
- **Vehicle-to-grid or vehicle-to-home:** No.
- **Warranty:** 3 years, extendable to 5.
- **Updated:** October 2026, from myenergi's own documents and the Octopus, OVO and E.ON Next charger lists.

## myenergi zappi GLO FAQs

### How is the zappi GLO different from the zappi?

The zappi GLO is single-phase only (7 kW), has no screen and is set up and controlled through the myenergi app. It adds an RFID access key reader. The zappi is available in 7 kW or 22 kW, has a backlit LCD with buttons, and has separate ECO, ECO+ and FAST modes.

### Can the zappi GLO charge from solar panels?

Yes. myenergi says Smart Mode uses surplus solar energy when it is available, alongside schedules and dynamic tariffs. With Smart Mode off, the GLO charges at full power while still prioritising solar if available.

### What does the zappi GLO do out of the box?

myenergi's quick start guide says it runs in Smart Mode with a built-in schedule from midnight to 8am, Monday to Friday. You can change or delete the schedule in the myenergi app.

### Does the zappi GLO work with Intelligent Octopus Go?

Octopus lists 'zappi (all models)' as a supported charger for Intelligent Octopus Go (checked 4 October 2026). OVO lists myenergi for Charge Anytime and E.ON Next lists zappi for Next Drive Smart.

### What warranty does the zappi GLO have?

Three years as standard. myenergi's extended warranty, which covers the zappi GLO, takes the total to five years if bought within three months of the standard warranty ending.

### What does installing the myenergi zappi GLO involve?

A qualified installer fits it on its own circuit, checks your supply and earthing, and notifies your network operator. myenergi lists built-in PEN fault protection. For solar charging, ask for the supply sensor to be fitted on the same visit.

### Which chargers are similar to the myenergi zappi GLO?

Andersen Quartz, Cord Zero and myenergi zappi share the most charger types with it (such as solar charging, cable type and smart tariff listings). They are listed by how many types they share, then A to Z; this is not a ranking. Compare any two side by side on our compare page.

### Does the myenergi zappi GLO support V2H or V2G?

No. myenergi does not publish vehicle-to-home (V2H) or vehicle-to-grid (V2G) support for the myenergi zappi GLO, so it charges the car only.

### How much does the myenergi zappi GLO cost?

We do not list prices, because they change often and most people buy a charger fitted, so the price depends on the installer and your home. Ask two or three installers for a fitted price for the myenergi zappi GLO by name. If you rent, or own a flat with private off-street parking, the EV chargepoint grant can cover 75% of the cost of buying and installing a chargepoint, up to £500.

## EV charger terms explained

- **Tethered charger:** A charger with the charging cable fixed to the unit.
- **Untethered (socket) charger:** A charger with a Type 2 socket instead of a fixed cable, so you plug in your own charging cable.
- **Type 2:** The standard connector for AC charging on cars sold in the UK and Europe.
- **Single-phase and three-phase:** Most UK homes have a single-phase supply, which limits a home charger to about 7 kW (32 A). A 22 kW charger needs a three-phase supply, and the car must accept 22 kW on AC to use it.
- **kW and kWh:** kW is charging power; kWh is energy. A 7 kW charger adds up to about 7 kWh an hour, less charging losses.
- **Solar charging:** A mode that varies the charging current to follow surplus solar generation, measured by a sensor on your supply, so the car uses power you would otherwise export.
- **CT clamp:** A current sensor clipped around a supply cable. It tells the charger how much power the home is importing or exporting.
- **Load management:** The charger lowers its charging current when the rest of the home is using a lot of power, so the main fuse is not overloaded.
- **PEN fault protection:** Protection that disconnects the charger if the combined neutral and earth (PEN) conductor in the supply fails. Chargers with it built in can usually be installed without an earth rod; your installer confirms what your supply needs.
- **OCPP:** Open Charge Point Protocol, an open standard that lets a charger connect to a third-party management platform as well as the maker's app.
- **RFID:** A card or key fob reader on the charger, used to stop other people starting a charge.
- **IP and IK ratings:** IP rates protection against dust and water (IP65 is dust tight and protected against water jets); IK rates impact resistance, from IK00 to IK10.
- **Vehicle-to-grid (V2G) and vehicle-to-home (V2H):** Sending power from the car's battery back to the grid or the home. It needs a bidirectional charger, a compatible car and approval from your network operator, and V2G also needs a supplier offer.
- **Smart tariff charger list:** The chargers an energy supplier says it can control for its smart EV tariff, such as Octopus's list for Intelligent Octopus Go. Suppliers add and remove chargers, so we show the date we checked.
- **EV chargepoint grant:** A GOV.UK grant for people who rent, or own a flat, with private off-street parking. It can cover 75% of the cost of buying and installing a chargepoint, up to £500 (checked 4 October 2026).

## Sources and how we check

- [myenergi, zappi GLO Datasheet DS-00015 rev E (November 2025)](https://support.myenergi.com/hc/en-gb/articles/35218999091857-zappi-GLO)
- [myenergi, zappi GLO product page](https://www.myenergi.com/product/zappi-glo/)
- [myenergi, zappi GLO Quick Start Guide](https://support.myenergi.com/hc/en-gb/articles/35718575374609-zappi-GLO-Quick-Start-Guide)
- [myenergi, zappi extended warranty](https://www.myenergi.com/product/zappi-extended-warranty/)
- [Octopus Energy, Intelligent Octopus Go supported chargers](https://octopus.energy/smart/intelligent-octopus-go/)
- [OVO Energy, Charge Anytime compatible EVs and smart chargers](https://www.ovoenergy.com/electric-cars/charge-anytime-cars-and-chargers)
- [E.ON Next, Next Drive Smart supported chargers](https://www.eonnext.com/tariffs/next-drive/smart)

Cite as: Best Chargers, "myenergi zappi GLO EV charger review", specs checked October 2026, https://www.bestchargers.co.uk/zappi-glo/